Sparco SB Prime 107
Sơn lót epoxy gốc dung môi
SPARCO SB PRIMER 107 là sơn lót epoxy hai thành phần gốc dung môi, độ nhớt thấp, phản ứng với chất đóng rắn để tạo thành lớp phủ bền lâu. Đây là lựa chọn lý tưởng để làm sơn lót cho bề mặt bê tông và bề mặt khoáng.
Thông tin kỹ thuật
- Công dụng
- SPARCO SB Prime 107 is recommended for the various applications:; Primer or surfacing onto prepared concrete surface, pavements, ramps, walkways, loading bay and industrial floors.; Primer onto existing concrete; Primer onto mineral substrate.
- Đặc tính
- Ready to use packing ensure correct mixing and ease of application within designed pot life which allows efficient work progress.; Especially suitable for highly absorbent substrates.; Excellent adhesion to mechanically cleaned surfaces.; Excellent impact and chemical resistant coatings.; Suitable for use in unventilated area.
- Chuẩn bị bề mặt
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed.; Any imperfections such as cracks, holes, and gouges should…
- Định mức
- It is recommended to apply SPARCO SB PRIME 107 at a rate of 5-6 m2 / litre / coat; minimum 2 coats for normal or dense concrete. Coverage may vary slightly depending on the surface porosity of the substrate and surface conditions.
- Đóng gói
- Product Packaging SPARCO SB PRIME 107 Part A 10 litres/ Part B 10 litres (per set).
- An toàn
- PRECAUTION After hardening thoroughly, SPARCO SB PRIME 107 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash…
- Hạn chế
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5N/ mm2 Consumption: It is recommended to apply SPARCO SB PRIME 107 at a rate of 5-6 m2 / litre / coat; minimum 2 coats for normal or dense…
Trích từ tài liệu kỹ thuật (TDS). Vui lòng xác nhận thông số đầy đủ với đội ngũ kỹ thuật của chúng tôi trước khi thi công.
Phù Hợp Cho
Sản Phẩm Liên Quan
EcoTough Floor Primer
Sơn lót sàn acrylic gốc nước
EcoTough Floor Primer là sơn lót, chất bịt bề mặt và chất kết dính một thành phần gốc nước, thân thiện với môi trường, dùng trước khi thi công EcoTough Floor Topcoat. Có thể rắc thêm phụ gia độn lên lớp sơn lót để thi công tiếp lớp EcoTough Floor Topcoat nhằm tạo bề mặt hoàn thiện chống trượt.
EcoTough Floor Topcoat
Sơn phủ urethane aliphatic gốc nước (hai thành phần)
EcoTough Floor là sơn phủ hai thành phần có độ bền cao, thân thiện với môi trường, có thể bổ sung thủy tinh tái chế để tạo bề mặt hoàn thiện chống trượt. Sản phẩm có hàm lượng VOC thấp, ít mùi, đồng thời thể hiện độ bền vượt trội và khả năng chịu được điều kiện tia UV cao. Sản phẩm được liên kết ngang bằng chất khâu mạch aliphatic, cho phép bám dính tuyệt vời trên bê tông và các bề mặt nền khoáng đã được xử lý cơ học. Sản phẩm có khả năng chống bám bẩn thấp, độ che phủ ướt tốt và độ bền hoàn thiện lâu dài.
Epoxy SF Bonding Primer #104
Sơn lót kết dính gốc epoxy
Sơn lót kết dính được phân loại trong Bảng Dữ liệu An toàn (SDS) của nhà sản xuất là hệ thống gốc epoxy. Bảng dữ liệu kỹ thuật (TDS) đầy đủ có sẵn theo yêu cầu qua biểu mẫu liên hệ.
Hỏi đội ngũ kỹ thuật của chúng tôi về Sparco SB Prime 107
Nhận đề xuất, ước tính định mức sử dụng hoặc tư vấn theo điều kiện công trường từ đội ngũ kỹ thuật của Sparco.