Market Segments
Electronics
Electronics manufacturing requires floors that control electrostatic discharge and stay dimensionally stable under equipment loads. Sparco's ElectroShield conductive epoxy system, supported by epoxy primers and screeds, protects sensitive components and clean production environments.
- Electrostatic discharge (ESD) control
- Clean-room compatible finishes
- Equipment load stability
Which Sparco products are used for Electronics?
Sparco recommends Epoxy SF Bonding Primer #104, Sparco 3-C Polyurethane Screed, Sparco ElectroShield SL 110, Sparco Epoxy Bonding Primer #100, Sparcofloor #102 for Electronics projects. Download each product's Technical Data Sheet (TDS) or request a specification from our technical team.
Recommended Products
Epoxy SF Bonding Primer #104
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Sparco 3-C Polyurethane Screed
Water-based polyurethane flooring screed
SPARCO 3-C Polyurethane Screed is a water-based with various coloured hybrid screed with good levelling and high chemical resistance system.
Sparco ElectroShield SL 110
Solvent-free conductive epoxy coating (ESD)
SPARCO ElectroShield SL 110 is a high performance, two- component, solvent free Epoxy flooring for electrostatic discharge (ESD) protected areas. This system combines an excellent chemical resistance and high mechanical strength ESD floor. It is an excellent choice for use as self-smoothing finish with permanent conductivity.
Sparco Epoxy Bonding Primer #100
Solvent-free epoxy primer
SPARCO EPOXY BONDING PRIMER #100 is a medium viscosity solvent free composition epoxy primer. Suitable to be applied on dry or damp surface. It is the ideal choice for concrete primers, asphalt surface primer and metal surface.
Sparcofloor #102
Solvent-free epoxy roller coating
SparcoFloor #102 is a 2-part solvent free high solid epoxy coloured coating that can provide a medium hard wearing, low maintenance, smooth gloss finish or slip resistant finish when broadcast with different aggregate grades.
Typical System Build-Up
A representative layered system for this segment, built from Sparco's primer, body and topcoat products.
Talk to us about your Electronics project
Send us your floor plan, drawings or site photos and our technical team will recommend a complete system.