Sparco Epoxy Thixotropic Compound
Two-component thixotropic epoxy repair adhesive
SPARCO EPOXY THIXOTROPIC COMPOUND is a high performance, two-component, solvent free adhesive and repair mortar. The adhesive paste with exceptional sag resistance for vertical and overhead applications; it combines an excellent chemical resistance and high mechanical strength repair. It creates an excellent choice for a smooth, uniform surface with compounds that fill voids, cracks, and joints. It forms a durable, moisture-tolerant bonds to wet concrete substrates.
Technical details
- Uses
- SPARCO EPOXY THIXOTROPIC COMPOUND is recommended for the various applications:; Fiber cement; Hard Natural Stone; Ceramics; Wood; Polyester, Epoxy; Glass; Bricks, Mortar, Masonry.
- Features
- High bond strength on concrete, brick, masonry substrates; Hardens without shrinkage; Good abrasion resistance; Impermeable to Liquids and water vapour; Durable, seamless; Excellent adhesion to mechanically cleaned surfaces; Excellent impact and good chemical resistant.
- Surface preparation
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed, and surface defects such as blowholes and voids must be fully exposed. >>Any imperfections such as cracks, holes, and gouges should…
- Coverage
- As guide, the consumption is approximately up to 1.90 kg/m² per mm of thickness; subject to conditions and porosity of the concrete.
- Packaging
- Product Packaging SPARCO EPOXY THIXOTROPIC COMPOUND Part A: 4 or 8 KG/ Part B: 2 or 4 KG (per set).
- Safety
- PRECAUTION After hardening thoroughly, it is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash with soap and water…
- Limitations
- Minimum substrate temperature 10 °C Maximum permissible moisture content of concrete substrate ** Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +30 °C max. ** Substrate must be dry or mat damp (no standing water). Brush the adhesive well into the substrate. Consumption: As guide, the consumption is approximately up to 1.90 kg/m² per mm of thickness;…
From the Technical Data Sheet. Confirm the full specification with our technical team before application.
Suitable For
Related Products
EcoTough Floor Primer
Water-based acrylic floor primer
EcoTough Floor primer is an eco-friendly, one component Water based primer, sealer and bonding agent prior for application of Eco Tough Floor Topcoat. Primer can be broadcasted with filler for subsequent application of EcoTough Floor Topcoat for an Anti-Slip Finish.
EcoTough Floor Topcoat
Water-based aliphatic urethane coating (two-component)
EcoTough Floor is an eco-friendly, two component high strength coating that can be enhanced with recycled glass for an Anti-Slip finish. It features a low VOC, low odour while demonstrating outstanding durability, and the ability to withstand high UV conditions. It is being crosslinked with an aliphatic crosslinker, which allows for excellent adhesion to concrete and mineral substrates that have been mechanically prepared. It exhibits low dirt pickup, good wet hiding, and long-lasting finishes.
Epoxy SF Bonding Primer #104
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Ask our technical team about Sparco Epoxy Thixotropic Compound
Get a recommendation, coverage estimate or site-specific advice from Sparco's technical team.